CORE DOMAINS

Robotics & Automation

End-effector grippers, pneumatic manifolds, and assembly fixtures.

Every gram at the end of a robot arm is speed and cycle time. We produce end-effector pneumatic grippers, gripping fingers, custom robot brackets, inspection fixtures, and conveyor components. Line-specific geometries can be revised repeatedly with no tooling cost.

PARTS WE PRODUCE

04 / 04

End-Effector Grippers

Part-specific gripping jaws, renewed within days for a new product at changeover.

Pneumatic Manifolds

Blocks with consolidated internal channels, cutting hose and fitting count and with it the leak points.

Assembly Fixtures

Locating and inspection aids, expected not to flex under clamping load.

Lightweighted Moving Parts

Components carried on the robot arm, where lower inertia shortens cycle time.

SECTOR REQUIREMENTS

What the Sector Demands, What the Process Answers

REQUIREMENT
Changeover Speed
On a product change, grippers and fixtures must be ready without holding up the line.
ANSWER
With no tooling step a new gripper design goes straight into production, and a revision is back on the line the same week.
REQUIREMENT
Moving Mass
Every gram the arm carries bears directly on acceleration and cycle time.
ANSWER
Support-free production allows hollowed and lattice geometries, and reinforced polymers give high rigidity per unit weight.
REQUIREMENT
Rigidity Under Clamping
If a fixture flexes under clamping load, locating accuracy is lost.
ANSWER
Reinforced polymers offer tensile modulus well above the unreinforced ones, so dimensions hold under clamping load.

Send us your CAD file for a technical quote.

STEP / STP / STL
24-hour response
NDA protected